We Offer Full Color Printing On Select Bottles & Mugs
D4 | digital four color process
This 4 color process applies ink directly to an item, followed by a protective clear coat. This results in a raised texture that adds a dimension to your print that brings it to life. Submitted artwork should be at 300+ dpi and must be qualified to print. Wrap imprints are available for an added cost.
H4 | heat transfer four color process
The H4 process is when ink is sprayed onto transfer film, then applied to an item. This is available as a one sided imprint, and can be done as a wrap for an additional cost. Artwork must be submitted at 300+ dpi and qualified to print. Available items are shown below.
|4 color processes||D4 | digital|
ink printed directly on bottle, followed by clear coating
|H4 | heat transfer|
ink sprayed onto transfer film, then applied to item
|wrap||1 side, 2 sided, or wrap||one side or wrap (allow gap on back)|
|print resolution||300+ dpi||300+ dpi|
|run charge / item||$2.00 [1 sided]|
$2.25 [two sided, wrap]
|$1.25 5.25″h x 4″w [1 sided]|
$1.75 5.25″h x 10.5″w [wrap – varies/item]
|production||Ships from California|
7 – 10 working days after proof approval
|Ships from California|
10 – 15 working days after pre-production proof approvals
|minimums||standard minimum quantities||144 pieces|
PRE-PRODUCTION PROOF required for H4 method, allow 5 working days
ART FORMAT ai • eps • pdf • psd • tif [text must be in vector, gif and jpeg upon approval]
RESOLUTION NEEDED 300+ dpi / 100% to size [higher resolution preferred, all text in vector] • SPOT COLORS not available
We recommend 1.2 pt line weight for best results. however, 0.5 pt will print for some curved shapes. Minimum font size should be around 6 pt for clarity. For any “fancy” fonts, we recommend discussing with the art department beforehand.